LCD 128X64 液晶屏_图文

BATRON

Specification for BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG

Version October 2004

0 DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 2 OF 17

DOCUMENT REVISION HISTORY 1: DATE DESCRIPTION DOCUMENT REVISION FROM TO A 2004.10.13 First Release. Based on a.) Test Specification: VL-TS-COG-BTC12864-05 REV A, 2004.09.22 b.) VL-QUA-012B REV.W 2004.03.20 According to VL-QUA-012B, LCD size is small because Unit Per Laminate=18 which is more than 6pcs/Laminate.

CHANGED BY

CHECKED BY

ZHANG LIN RONG YAN FANG SHOU

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 3 OF 17

CONTENTS
Page No. 1. 2. 3. 4. 4.1 4.2 5. 5.1 5.2 6. 7. 8. GENERAL DESCRIPTION MECHANICAL SPECIFICATIONS INTERFACE SIGNALS ABSOLUTE MAXIMUM RATINGS ELECTRICAL MAXIMUM RATINGS FOR IC ONLY ENVIRONMENTAL CONDITION ELECTRICAL SPECIFICATIONS TYPICAL ELECTRICAL CHARACTERISTICS TIMING SPECIFICATIONS APPENDIX – LED SPECIFICATIONS LCD COSMETIC CONDITIONS REMARK 4 4 8 9 9 9 10 10 11 15 17 17

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 4 OF 17

Specification of LCD Module Type Item No.: COG-BTC12864-05
1. General Description 128 x 64 dots FSTN Black & White Positive Transflective LCD Graphic Module. Viewing Direction: 6 O’clock. Driving duty: 1/65 Duty, 1/9 bias. “ULTRA CHIP” UC1601 (COG) LCD Controller-Driver or equivalent. Logic Power Supply: +3V. FPC connector. White LED05 Backlight.

2.

Mechanical Specifications The mechanical detail is shown in Fig. 1 and summarized in Table 1 below. Table 1 Parameter Outline dimensions Viewing area (V.A.) Active area (A.A.) Display format Dot size Dot spacing Dot pitch Weight: Specifications 76.5(W) x 82.5(H) x 8.5(D)(Include FPC and Backlight) 60.00 MIN.(W) x 40.00 MIN.(H) 56.945(W) x 37.425(H) 128 x 64 0.43(W) x 0.57(H) 0.015(W) x 0.015(H) 0.445(W) x 0.585(H) TBD Unit mm mm mm dots mm mm mm grams

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 5 OF 17

Figure 1: Module Specification

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 6 OF 17

Figure 1(b): Block diagram

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 7 OF 17

Figure 2: Application Circuit

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 8 OF 17

3.

Interface signals Table 2 Symbol CS0 RST CD WR RD D0(SCK) D1 D2(SD1) D3 D4 D5 D6 D7 Description Chip Select. In parallel mode and S8 mode, chip is selected when CS0=”L” and CS1=”H”. When the chip is not selected, D[7:0] may be high impedance. When RST =”L”, all control registers are re-initialized by their default states. When RST is not used, connect the pin to VDD. Select Command or Display Data for read/write operation. “L”: Command ”H”: Display data RD/WR(WR[1:0]) controls the read/write operation of the host interface. In parallel mode, RD/WR(WR[1:0]) meaning depends on whether the interface is in the 6800 mode or the 8080 mode. In serial interface modes, these two pins are not used. Connect to VSS. Bi-directional bus for both serial and parallel host interfaces. In S8 and S9 mode, connect unused pins to VDD or VSS. PS=1x Ps=0x D0 D0 SCK D1 D1 D2 D2 SD1 D3 D3 D4 D4 D5 D5 D6 D6 D7 D7 VDD1 is the digital power supply and it should be connected to a voltage source that is no higher than VDD2&3. VDD2&3 is the analog power supply and it should be connected to the same power source. Minimize the trace resistance for VDD2&3. Ground. PS[1:0] Parallel/Serial. Serial modes: “LL”: serial (S8) “LH”: serial (S9) Parallel modes: “HL”: 8080 “HH”: 6800 LCD Bias Voltages. These are the voltage sources to provide SEG driving currents. These voltages are generated internally. Connect capacitors of CBX value between VBX+ and VBX–. The resistance of these four traces directly affects the SEG driving strength of the resulting LCD module. Minimize the trace resistance is critical in achieving high quality image. Main LCD Power Supply. A by-pass capacitor CL is optional. When CL is used, connect CL between VLCD and VSS, and keep the trace resistance under 300 Ohm. Anode of LED Backlight. Cathode of LED Backlight.

Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13

14

VDD

15 17 18 16 19 20 21 22 -

VSS PS0 PS1 VB1+ VB1VB0VB0+ VLCD A K

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 9 OF 17

4. 4.1

Absolute Maximum Ratings Electrical Maximum Ratings – for IC Only Table 3 Parameter Logic supply voltage LCD generator supply voltage Analog circuit supply voltage Voltage difference between VDD and VDD2/3 LCD generated voltage Any input/output Operating temperature range Storage temperature Note: 1. VDD is based on VSS = 0V. Symbol VDD VDD2 VDD3 VDD2/3 - VDD VLCD VIN/ / VOUT TOPR TSTR Min. -0.3 -0.3 -0.3 -0.3 -0.4 -30 -55 Max. +4.0 +4.0 +4.0 1.2 +12 VDD +0.3 +85 +125 Unit V V V V V V C C

2. Stress values listed above may cause permanent damages to the device.

4.2

Environmental Condition Table 4 Storage Operating Temperature Temperature (Tstg) (Topr) Min. Max. Min. Max. 0 C +50 C -10 C +60 C 95% max. RH for Ta 40 C < 95% RH for Ta > 40 C Frequency: 10 55 Hz Amplitude: 0.75 mm Duration: 20 cycles in each direction. Pulse duration : 11 ms 2 Peak acceleration: 981 m/s = 100g Number of shocks : 3 shocks in 3 mutually perpendicular axes.

Item Ambient Temperature Humidity Vibration (IEC 68-2-6) cells must be mounted on a suitable connector Shock (IEC 68-2-27) Half-sine pulse shape

Remark Dry no condensation 3 directions 3 directions

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 10 OF 17

5. 5.1

Electrical Specifications Typical Electrical Characteristics At Ta = 25 C, VDD = 3V 5%, VSS=0V. Table 5

Parameter Supply voltage (Logic & booster) LCD driving voltage (Built-in)

Symbol VDD-VSS VLCD-VSS

Conditions

Min. 2.85 -

Typ. 3.0 9.5

Max. 3.15 -

Unit V V

Input signal voltage Supply Current (Logic & booster)

VIH VIL IDD

At Ta = 0 C, Character mode, VDD = 3V,Note 1 At Ta = +25 C, Character mode, VDD = 3V,Note 1 At Ta = +50 C, Character mode, VDD = 3V, Note 1 “H” level “L” level Character mode, Note 1 Checker board mode, Note 1 Forward current =30mA No. of LED chips =1x2=2.

9.0 0.8 VDD1 3.4 33

9.2 8.6 0.5 0.54 3.6 45

9.4 0.2VD D1 0.75 0.81 3.8 -

V V V V mA mA V cd/ m2

Supply Voltage of White LED05 backlight Luminance (on the backlight surface) of backlight

VLED05

Note 1: There is tolerance in optimum LCD driving voltage during production and it will be within the specified range.

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 11 OF 17

5.2

Timing Specifications Parallel bus timing characteristics (for 8080 MCU) At Ta= 0 C to +50 C

Figure: 3

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 12 OF 17

Parallel bus timing characteristics (for 6800 MCU) At Ta= 0 C to +50 C

Figure: 4

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 13 OF 17

Figure: 5

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 14 OF 17

Serial bus timing characteristics At Ta= 0 C to +50 C

Figure: 6

Serial bus timing characteristics At Ta= 0 C to +50 C

Figure: 7

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 15 OF 17

6.

Appendix –LED Specifications

6.1.

6.2.

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 16 OF 17

6.3.

6.4.

6.5.

6.6.

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de

BATRON
VL-FS-COG-BTC12864-05 REV. A (BTHQ 128064AVC1-FSTF-06-LEDWHITE -COG) OCT/2004
PAGE 17 OF 17

7.

LCD Cosmetic Conditions a.) Reference document follow VL-QUA-012B. b.) LCD size of the product is small. Remark: a.) Identification labels will be stuck on the module without obstructing the viewing area of display, b.) Data Modul does not responsible for any polarizer defect after the protective film has been removed from the display.

8.

- END -

Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 –

www.data-modul.de


相关文档

128x64 LCD液晶显示屏接口定义和驱动程序
128x64点阵型LCD液晶屏TX-12864C
128X64液晶屏参数设置及显示程序
128x64液晶显示屏c51驱动函数
LCD液晶显示屏简介
电脑版