ALU and EES OLT VEIP 配置文档

ALU and EES OLT VEIP 配置文档
一. VEIP (Virtual Ethernet interface point) This managed entity represents the data plane hand-off point in an ONU to a separate (non-OMCI) management domain. The virtual Ethernet interface point is managed by OMCI, and is potentially known to the non-OMCI management domain. One or more Ethernet traffic flows are present at this boundary. Instances of this managed entity are automatically created and deleted by the ONU. This is necessary because the required downstream priority queues are subject to physical implementation constraints. The OLT may use one or more of the virtual Ethernet interface points created by the ONU. It is expected that the ONU would create one virtual Ethernet interface point for each non-OMCI management domain. At the vendor’s discretion, a virtual Ethernet interface point may be created for each traffic class. 二.VEIP 的实现: VEIP 主要是针对 L3 RGU 软件版本。 1. 不配置 VEIP, ONT 默认所有口都是 L3 口。 在 OLT 上,只需要配置 UNI1 口的业务就可以了,L2/L3 的业务都绑 定在 UNI1 口上 面。 CU/CT 的版本, 可以通过 Web GUI 来设置 L2/L3 端口。

在 OLT 上,只需要配置 vlan filter,vlan 的操作是通过 Web GUI 来 配置的,主要是 add vlan 的操作。 2. 当配置 veip 时,通过关联 VEIP 和 UNI 口来确定哪些口是 L2 UNI, 哪 些口是 L3 UNI.实现通过 OMCI 来指定 UNI 为 L2/L3 端口。ONT 根据 uni-g 的 non-omci management identifier 有没有指向 virtual Ethernet interface point 来判断该 uni 口是三层口还是二 层口: 当 non-omci management identifier 值为 0 时,表示该 uni 为二层 口; 当 non-omci management identifier 值指向 veip point 时,表示该 uni 为三层口; #ONT/system/mib>show 47 Table MacBriPortCfgData, MAC Bridge Port Configuration Data, total 2 instances EntityID = 0x0001 BridgeIdPtr = 0x0001 PortNum = 1 TPType = 11 TPPointer = 0x0e01 PortPriority = 0 PortPathCost = 1 PortSpanTreeInd = 0 EncapMethod = 0

LanFCSInd = 1 PortMacAddr = 00 00 00 00 00 00 OutboundTD = 0x0000 InboundTD = 0x0000 NumOfAllowedMac = 0 EntityID = 0x0002 BridgeIdPtr = 0x0001 PortNum = 2 TPType = 5 TPPointer = 0x0001 PortPriority = 0 PortPathCost = 1 PortSpanTreeInd = 0 EncapMethod = 1 LanFCSInd = 1 PortMacAddr = 00 00 00 00 00 00 OutboundTD = 0x0000 InboundTD = 0x0000 NumOfAllowedMac = 0

#ONT/system/mib>show 329

Table VirtualEthUni, Virtual Ethernet Interface Point, total 1 instances EntityID = 0x0e01 AdminState = 0 OpState = 0 Interdomain = "" TcpUdpPointer = 0xffff IanaPort = 0xffff

#ONT/system/mib>show 264 Table Unig, Uni-g, total 7 instances EntityID = 0x0101 CfgOptionStatus = 0x000e AdminState = 0 ManageCapability = 2 NonOmciPointer = 0x0e01

EntityID = 0x0102 CfgOptionStatus = 0x000e AdminState = 0 ManageCapability = 2 NonOmciPointer = 0x0e01

EntityID = 0x0103 CfgOptionStatus = 0x000e AdminState = 0 ManageCapability = 2 NonOmciPointer = 0x0000

EntityID = 0x0104 CfgOptionStatus = 0x000e AdminState = 0 ManageCapability = 2 NonOmciPointer = 0x0000

EntityID = 0x0201 CfgOptionStatus = 0x000e AdminState = 0 ManageCapability = 2 NonOmciPointer = 0x0000

EntityID = 0x0202 CfgOptionStatus = 0x000e AdminState = 0 ManageCapability = 2

NonOmciPointer = 0x0000 EntityID = 0x0301 CfgOptionStatus = 0x000e AdminState = 0 ManageCapability = 2 NonOmciPointer = 0x0000

#ONT/system/mib>show 11 Table EthUni, PPTP Ethernet UNI, total 4 instances EntityID = 0x0101 ExpectedType = 34 SensedType = 34 AutoDectectCfg = 0 EthLoopbackCfg = 0 AdminState = 0 OpState = 0 DuplexInd = 3 MaxFrameSize = 1536 DTEorDCEInd = 0 PauseTime = 0 BridgedorIPInd = 1 ARC = 0

ARCInterval = 5 PppoeFilter = 0 PowerControl = 0 EntityID = 0x0102 ExpectedType = 34 SensedType = 34 AutoDectectCfg = 0 EthLoopbackCfg = 0 AdminState = 0 OpState = 1 DuplexInd = 0 MaxFrameSize = 1536 DTEorDCEInd = 0 PauseTime = 0 BridgedorIPInd = 1 ARC = 0 ARCInterval = 5 PppoeFilter = 0 PowerControl = 0

EntityID = 0x0103 ExpectedType = 34

SensedType = 34 AutoDectectCfg = 0 EthLoopbackCfg = 0 AdminState = 0 OpState = 1 DuplexInd = 0 MaxFrameSize = 1536 DTEorDCEInd = 0 PauseTime = 0 BridgedorIPInd = 0 ARC = 0 ARCInterval = 5 PppoeFilter = 0 PowerControl = 0 EntityID = 0x0104 ExpectedType = 34 SensedType = 34 AutoDectectCfg = 0 EthLoopbackCfg = 0 AdminState = 0 OpState = 0 DuplexInd = 3

MaxFrameSize = 1536 DTEorDCEInd = 0 PauseTime = 0 BridgedorIPInd = 0 ARC = 0 ARCInterval = 5 PppoeFilter = 0 PowerControl = 0

#ONT/system/mib> BLM1500-x# show ont ont-6-1-6 port st MIB AID IF name PST SST CONFIG ACTUAL -------------------------------------------------------------- ONID-6-1-6-329-14.1 VIF-14-1 IS-NR ACT ONID-6-1-6-82-3.1 VID-3-1 OOS-MA MT ONID-6-1-6-53-2.1 VF0-2-1 IS-NR ACT ONID-6-1-6-53-2.2 VF0-2-2 IS-NR ACT ONID-6-1-6-11-1.1 GIGE-1-1 IS-NR ACT AU FD 1000BT ONID-6-1-6-11-1.2 GIGE-1-2 OOS-AU FLT AU DN ONID-6-1-6-11-1.3 GIGE-1-3 OOS-AU FLT AU DN ONID-6-1-6-11-1.4 GIGE-1-4 IS-NR ACT AU FD 1000BT

#ONT/traffic/omci>show connection all ---------------------- Connection ID = 0 ---------------------- Completed = 1, Bridge Id = 0x0001, valid = 1 Total Port Num = 2 Wan Port Num = 1 Unicast Port Num = 1 Multicast Port Num = 0 Broadcast Port Num = 0 802.1p Port Num = 0 Lan Port Num = 1 Iphost Port Num = 0 Eth Port Num = 0 EthFlow Port Num = 0 xDsl Port Num = 0 VirUni Port Num = 1 Bridge Port Id = 0x0002, type = UNCT, TP Ptr = 0x0001 Pon Info: IwTp GemPort DsQ UsQ Mc Dir DFlow CPUQ UFlow Type Tcont 0x0001 0x0001 0x0000 0x8001 00 003 00001 0000 00001 RG| 0x0286

Bridge Port Id = 0x0001, type = VIRUNI, TP Ptr = 0x0e01, IPHost = 0xffff --------------------------- END [0] --------------------------- 爱立信 OLT 默认 ONT 起来 Eth UNI 都是 L3 口, 当配置了 VEIP 以后, 如果不绑定 UNI 口,Eth UNI 都是 L2 口; L3 UNI 口的绑定的命令如下: config ont ont-6-1-6 bridge brdg-1 bridge brdg-1 port VIF-14-1 gem 1 811 pon2488-1 brdg-1 vlanf brdg-1 VIF-14-1 tpvf_ud_04 4010 vlanf brdg-1 gem-1 tpvf_ud_04 4010 mgmtid eth-1-1 VIF-14-1 Eth UNI 1 为 L3 口 mgmtid eth-1-2 VIF-14-1 Eth UNI 2 为 L3 口 将 bridge 绑定在 VIF port 上,L3 业务的 vlan filter 也都配在这个 bridge 即可,不用 指定 UNI 口,L3 UNI 口默认都绑定在 VIF 上。 L2 UNI 口的绑定命令如下 mgmtid eth-1-3 OMCI Eth UNI 1 为 L2 口 mgmtid eth-1-4 OMCI Eth UNI 1 为 L2 口 L2 口的配置,可以按照常规的 bridge 的配置进行: bridge brdg-2

bridge brdg-2 port eth-1-2 gem 1 812 pon2488-1 brdg-2 vlanf brdg-2 eth-1-2 tpvf_ud_04 4020 vlanf brdg-2 gem-2 tpvf_ud_04 4020 vlan eth-1-2 4020 qinQ strip 三.配置脚本: 1. 爱立信: enter ont ont-6-1-6 oos configure interface ont-6-1-6 vendor id CIGG vendor serial 88888888 password 8888888888 exit restore ont ont-6-1-6

con int ont-6-1-6 grant 1 100000 HSIA exit

con

ont ont-6-1-6 bridge brdg-1 bridge brdg-1 port vif-14-1 gem 1 811 pon2488-1 brdg-1 vlanf brdg-1 gem-1 tpvf_ud_04 4020 vlanf brdg-1 VIF-14-1 tpvf_ud_04 4020

exit edit port gsx-3-b1 oos enter crs gem 811 olt-6-1 gsx-3-b1 add 0 ====================组播===================== copy prof sdv HD_PVR_64 XML reg put /system/sdvprf/XML 1000000,2048,0,0,con int ont-6-1-6 sdvp XML sdv 811 4020 end ont ont-6-1-6 gemmc 1 4065 pon2488-1 brdg-1 224.1.1.1 239.255.255.255 exit enter ipmc 4020 224.3.3.3 gsx-3-b1 auto-flow 5000 1 SDTV

3. ALU 配置脚本: ==============================TL1==================== ====================== ent-ont::ont-1-1-3-1-5::::SERNUM=CIGG22222222,SWVERPLND=3F E54378AOCI12; ed-ont::ont-1-1-3-1-5::::SWVERPLND=3FE54567AOCI02:is; ent-ontcard::ontcard-1-1-3-1-5-1:::10_100BASET,4,0::is; ed-ontenet::ontenet-1-1-3-1-5-1-1:::::is; ed-ontenet::ontenet-1-1-3-1-5-1-2:::::is; ed-ontenet::ontenet-1-1-3-1-5-1-3:::::is; ed-ontenet::ontenet-1-1-3-1-5-1-4:::::is; ==========================================VEIP======= ========================== configure equipment ont slot 1/1/3/1/5/14 planned-card-type veip plndnumdataports 4 plndnumvoiceports 0 configure interface port uni:1/1/3/1/5/14/1 admin-up configure interface port uni:1/1/3/1/5/14/2 admin-up configure interface port uni:1/1/3/1/5/14/3 admin-up configure interface port uni:1/1/3/1/5/14/4 admin-up ===============================CLI=================== =====================

configure service vpls 4020 customer 1 v-vpls create vlan 4020 configure service vpls 4020 sap lt:1/1/3:4020 create configure service vpls 4020 sap ntio-1:sfp:2:4020 create configure service vpls 4020 no shutdown

configure qos profiles ingress-qos pbit7 dot1-p0-tc 1 dot1-p1-tc 1 dot1-p2-tc 1 dot1-p3-tc 1 dot1-p4-tc 1 dot1-p5-tc 1 dot1-p6-tc 1 dot1-p7-tc 1 configure qos profiles bandwidth 11 committed-info-rate 10000 assured-info-rate 10000 excessive-info-rate 10000 delay-tolerance 8 configure qos interface 1/1/3/1/5/14/1 upstream-queue 1 bandwidth-profile name:11 configure vlan id 4020 mode residential-bridge in-qos-prof-name name:pbit7

configure bridge port 1/1/3/1/5/14/1 max-unicast-mac 128 configure bridge port 1/1/3/1/5/14/1 vlan-id 4020 configure bridge port 1/1/3/1/5/14/1 pvid 4020 ================================组 播=========================================== configure igmp channel vlan:1/1/3/1/5/14/1:4020 max-num-group 10 configure igmp system start configure mcast channel 224.3.3.3 src-ip-addr 0.0.0.0 peak-bit-rate 1000 vlan-id 4020

configure service vpls 4020 customer 1 v-vpls create vlan 4020 configure service vpls 4020 sap lt:1/1/3:4020 create configure service vpls 4020 sap lt:1/1/3:4020 igmp-snooping send-queries configure service vpls 4020 sap lt:1/1/3:4020 igmp-snooping version 2 configure service vpls 4020 sap ntio-1:sfp:2:4020 create configure service vpls 4020 no shutdown


相关文档

OLT开局脚本配置
EPON OLT C220开局配置模板
REDBACK培训文档-AAA and Radius配置
OLT配置方法以及维护手册
最新华为OLT配置说明名师资料汇编
烽火OLT-04开局配置手册
华为OLT配置说明资料 共47页
DPCA_EES系统安装部署手册
7342 FTTU OLT板卡链路保护配置和测试(Ed1.0)
华为OLT配置说明学习资料
电脑版